Thursday, September 8, 2016

New misting system installations by: www.CustomMistSystems.com

 
 
New misting system installations.
 
 
     Our custom high pressure misting systems have been used in outdoor cooling applications for over a decade. Our systems will provide outdoor cooling reducing temperatures by up to 30 degrees Fahrenheit with virtually no noticeable increase in the relative humidity. Applications for outdoor mist systems include restaurants, theme parks, hotels and resorts, arenas, tennis courts, golf facilities, fountains, waterfalls, patios and more.
 
     A Custom mist system when pressurized to 1000 PSI, the water droplets are as small as 5 microns (5 millionths of a meter or 1/10th. the size of a human hair) in diameter can be produced. At this level, ‘flash evaporation’ occurs reducing the ambient temperature by up to 30 degrees. This process of ‘Thermal Dynamics’ is effective because water requires energy (600 calories of heat to evaporate 1 gram of water) to evaporate. This energy exchange results in outdoor cooling and reduces the temperature inside the area which the misting system is installed around.
 
     As with any outdoor mist cooling system, the overall effectiveness of the mist system will depend on the outside temperature, the humidity levels, and the air exchange rate. With temperatures above 80 degrees Fahrenheit and low humidity levels (below 60%) the mist system results can be dramatic especially when there is constant air exchange within the patio. Fresh incoming air is quickly cooled without causing an uncomfortable increase in humidity levels. As with any evaporative cooling system, the more moisture evaporated, the greater the systems outdoor cooling capability will be.
 
     For significant improvements in the performance of any climate control system, contact our Customer Service Department for system consultation or for and design assistance on a new or pre-existing system. Below are some pictures of some of our recent installations.
 
We are conveniently located in Indio, Ca. and we proudly serve all of Southern California.

Office: 1-(760)-328-5545
Toll Free: 1-(844)-486-MIST (6478)
Web: www.custommistsystems.com
Email: info@custommistsystems.com
82-680 Showcase Pkwy, Suite #2
Indio, CA 92203
License - Bonded - Insured
CA. License #994050

#custommistsystems #coachellavalleymistsystems #mistsystems #mistingsystems #misting #custommistinc #patiomisting #misters #mistingsystem #coachellavalley #palmsprings #palmdesert #laquinta #indianwells #indio #pga #ranchomirage
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 



Posted by at No comments:

Friday, May 20, 2016

Custom Misting & Fogging System installation in Rancho Mirage, CA. by: www.CustomMistSystems.com

 
Custom Misting & Fogging System installation in Rancho Mirage, CA.
By: www.CustomMistSystems.com
 


     At Custom Mist we not only manufacture and install misting systems, we can also create dramatic effects by installing misting and fogging effects around trees, rocks, plants, water features, grottos, garden areas and even fire features to transform your land scape into a unique and mystical experience as seen in the pictures below of one of our recent installations in Rancho Mirage, CA. All of our systems are designed, manufactured and installed in-house and as the misting & fogging industry leader Custom Mist Inc. is committed to state of the art technology, sophisticated production techniques, and the highest quality “Made in America” materials in the manufacture of its misting and fogging systems.

     All of our custom high pressure misting and fogging systems are built with the highest quality stainless steel tubing, hydraulic hoses, re-usable hydraulic fittings, high pressure industrial grade compression fittings and the most advanced high pressure pump module in the industry that our engineering department developed the HD-1000 that is precision built to outlast the competition and does just that. 
 
         Misting and fogging systems that are created, developed and installed by Custom Mist Inc. will add aesthetic value and outdoor cooling to any project that it’s incorporated in. Our misting and fogging systems mimic characteristics from a light & soft landscape mist to dramatic fog affects. All our systems can be incorporated in any landscape design.

    For more information, schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.

"We proudly serve all of Southern California"

Office: 1-(760)-328-5545
Toll Free: 1-(844)-486-6478
82-680 Showcase Pkwy. Suite #2
Web: www.CustomMistSystems.com
Email: info@CustomMistSystems.com
License - Bonded - Insured
CA. License #994050

#custommistsystems #coachellavalleymistsystems #mistsystems #mistingsystems #misting #custommistinc #patiomisting #misters #mistingsystem #coachellavalley #fogging #foggingsystems
 
 



Posted by at No comments:

Sunday, March 27, 2016

New misting system installation's in the Coachella Valley, CA by: www.CustomMistSystems.com




New misting system installation's in the Coachella Valley, CA by:
 
 
     During the last few weeks our installation and design department at Custom Mist has been very busy designing and installing misting & fogging system through out the Coachella Valley due to the recent rise in the temperature.
 
     At Custom Mist Inc. we are commitment to product integrity and system performance and are backed by a worldwide distribution network and a team of knowledgeable service, installation and technical personnel. On-site evaluation and technical support are available before, during and after installation. With thousands of installations performed we guarantee our systems can achieve results in even the most challenging environments.

     With over a decade of research, development and installation experience our engineers have culminated the current design and installation of the Custom Mist System the pinnacle of the misting and fogging industry spanning a wide range of applications. Additionally, our misting and fogging systems have helped establish misting systems as the most efficient method of climate control for numerous applications such as outdoor cooling, special effects fogging, dust control, odor control and humidification.

      The heart of the Custom Mist system is the specially designed atomizing nozzle, which atomizes pressurized water. The premise behind this technology is relatively simple: as water evaporates, the surrounding air is cooled. The Custom Mist System is engineered to maximize these effects in a controlled manner, while maintaining cost-effectiveness. Our systems are also commonly used to evenly apply chemical concentrates for purposes such as disinfecting, fertilizing, odor abatement and pest control.
 

          Why should I care, you ask? Countless Custom Mist Inc. customers rely on our products and technology to significantly improve their bottom line.
 
Below are some pictures of our recent installations and some of the products we manufacture.

 For more information, schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.

We are conveniently located in Indio, Ca. and we proudly serve all of Southern California.  

Office: 1-(760)-328-5545
Toll Free: 1-(844)-486-MIST (6478)
82-680 Showcase Pkwy, Suite #2
Indio, CA 92203
License - Bonded - Insured
CA. License #994050

#custommistsystems #coachellavalleymistsystems #mistsystems #mistingsystems #misting #custommistinc #patiomisting #misters #mistingsystem #coachellavalley #palmsprings #palmdesert #laquinta #indianwells #indio #pga #ranchomirage



Posted by at No comments:

Thursday, March 10, 2016

Misting Pumps manufactured, installed and built by www.CustomMistSystems.com

 
 


Misting Pumps manufactured, installed and built by:
 www.CustomMistSystems.com
 
 
     All of our Custom Mist pump modules are designed and assembled in our facility and are all equipped with a dual 5 micron filtration system to ensure clean water to the nozzles, rubber mounted sub-frame, rubber motor mounts, constant duty totally enclosed fan cooled (T.E.F.C.) Marathon single phase electric motor, electrical water valve, Cat ceramic plunger pump, low pressure switch, drain valve, adjustable pressure regulator, 2000 psi liquid filled gauge and a thermo over-load reset button to ensure durability.
Each pump module is custom engineered for specific applications, such as motor rpm, voltage, horsepower, staged, zoned and for wireless remote systems. Our mist systems are designed to take 35 psi. and turn it into 1000 psi. for ultimate cooling.
 
      Custom Mist proudly does all pump manufacturing in house with a team that is constantly improving and developing innovative misting systems to maximize efficiently for every installation, all while striving to continually manufacture the highest quality "Made In America" products. This is why we maintain open lines of communications with our clients to insure the product you receive meets your unique requirements and you do not feel you have made a catalog purchase. With over a decade of experience in the industry, we have developed a distinctive method to combine high pressure hydraulics, electronic control systems and aesthetically pleasing functional designs. Please see the pictures below of three different configurations of our pump modules. Other configurations available to meet all requirements.
 
Pump Specifications:
 
  • Powder coated sub frame & enclosure.
  • Dual 5 micron filtration system. (Two 10" filters)
  • TEFC industrial single phase electric motor with motor overload protection.
  • Cat industrial ceramic plunger pump. (1000 psi.)
  • Drain valve.
  • Voltage options: 120 volt single phase - 575 volt three phase
  • Low pressure switch. (Pump Saver)
  • Electric inlet water solenoid valve.
  • Adjustable pressure regulator.
  • ON / OFF switch.
  • High pressure outlet glycerin filled pressure gauge.
  • Low pressure inlet glycerin filled pressure gauge. (On industrial pump models)
  • External by-pass hose w/ check valve. (On industrial pump models)
  • Internal by-pass  (On direct drive pump module on Skid)
  • Low voltage 24v. switching.  (Optional)
  • 40 VA transformer  (Optional)
  • Electrical contactor.  (Optional)
  • 9' power cord or 1/2" flex electrical conduit for power source.
  • Rubber mounted sub frame & motor mounts to ensure quiet operation.
  • Pump dimensions: Length 26" Width 13" Height 13.2"  (Industrial HD-1000 Model)
  • Pump dimensions: Length 22" Width 11" Height 13.2"  (Residential Model on Skid)
  • Pump dimensions: Length 35" Width 26.5" Height 14"  (Industrial BD Model on Skid)

 For more information or for any design assistance please contact our customer service department.

 
Office: 1-760-328-5545
Toll free: 1-844-486-6478
Email: info@CustomMistSystems.com
Web: www.CustomMistSystems.com
82-680 Showcase Pkwy. Suite #2
Indio, CA 92203
License - Bonded - Insured
License #994050
 
#CustomMistSystems
#Misters #Misting #MistSystem #MistingSystem #PumpModule #MistPump #CustomMist #Custommistinc



Residential pump model on skid.


Industrial HD pump model with pump housing.

Industrial HD pump model specifications.
2Hp, 3gpm shown in picture.
 

Industrial BD pump model on skid.


 


Posted by at No comments:

Wednesday, March 2, 2016

New horse cooling misting system installation by: www.CustomMistSystems.com




 

 
New Horse cooling misting system installation by:
 
 
     One March 2nd. 2016 our installation department installed over 200' of stainless steel atomization misting line over four horse stalls and over the middle of the walkway to cool off all the horses and anyone inside the structure. When the misting system turns on, only the two rows of mist over the horse stalls turn on, then for when the weather gets warmer we installed a section control valve for the misting line above the middle walkway that can be turned on and off anytime the customer pleases. We also plumbed a new water line and ran new electrical from the breaker panel to the pump module and installed our industrial HD-1000 pump module with a 2HP motor, 1.5gpm pump, a power switch on the front of the pump module and a pulsation dampener to keep the vibration noise   to a minimum so the horses don't get spooked.     
 
 "Please see the pictures below"
 
     If the weather is either too hot or humid it is extremely hard for horses to shed their body heat. Most animals are kept in barns or shade structures that can be substantially hotter then outside temperatures due to the radiant heating of the steel structure. Our custom designed misting systems can protect horses from excessive heat and keep them cool and refreshed. All of our custom designed misting systems are energy efficient, use water only when needed and provide you with an economical solution.


 
 
       Benefits:
  • Can lower the temperature up to 35 degrees.
  • Can help lower the threat of morality.
  • Can help eliminate flying incest's.
  • Can help reduce irritation and discomfort to your horses.
  • Can help keep dust and pollen at bay.
 
For any questions or to schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.
Posted by at No comments:

Thursday, February 25, 2016

Mario's Italian Cafe Restaurant Misting System Installation by: www.CustomMistSystems.com

 
 
 
Mario's Italian Café Restaurant Misting System Installation by:
www.CustomMistSystems.com
 
 

 
     Recently Mario's Italian Café in Palm Desert, CA has contracted us at Custom Mist Inc. to design and install a custom high pressure patio mist cooling system for both their patios to cool off all their customers and staff. Our technicians installed over 200' of stainless steel tubing with custom built copper extensions mounted under the front entry awning and on the south patio we spaced out the nozzles every 24" because of the low patio and because we aimed the nozzles straight down to make the system more effective, on the north facing patio facing Hwy 111 we spaced out the nozzles every 18" because we aimed out the nozzles out at a 30 degree angle so none of the customers will get wet and to create a cool and soothing atmosphere for everyone on the patio. We mounted our Industrial pump module on the roof and tapped into an existing water source that we plumbed to the pump module and plugged into a 240 volt switched outlet ran from inside provided by the restaurant.
 
     The pump module that we designed and installed was our Industrial HD-1000 series with a 2Hp motor and  2.2gpm pump head that is capable of supplying 100 misting nozzles as seen in the picture below.
 

     At Custom Mist our custom high pressure misting systems allow businesses to maximize valuable seating capacity and will draw passerby's in. Having a personalized custom misting system installed by our factory trained technicians can help maintain and even lengthen peak periods of business for maximum table turn-over for any restaurant, hotel, resort, walkway, lounge or any out door seating area. 

 

Benefits of having a misting system:
  • Maximize seating
  • Lowers the temperature  
  • Draws in passerby's
  • Happy customers
  • Increase revenue
  • Keep your guests comfortable
  • Enhances your ambiance
  • Helps eliminate flying insects
  • Lengthen peak periods of business


We offer Local discounts to all Coachella valley city's including Palm Springs, Cathedral City, Rancho Mirage, Palm Desert, Indian Wells, Bermuda Dunes, Thousand Palms, Desert Hot Springs, La Quinta, Coachella, Indio and Thermal.
 
For more information, schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.
 

Office:  1-(760)-328-5545
Toll Free:  1-(844)-486-6478 

82-680 Showcase Pkwy, Suite #2
Indio, CA 92203
License - Bonded - Insured
Ca. License# 994050
 

 
 



Posted by at No comments:

Friday, February 19, 2016

Misting installation in Palm Desert, CA located in Big Horn Country Club by: www.CustomMistSystems.com





New Misting Installation in Palm Desert, CA located in Big Horn Country Club.
 
 
 
     Recently our engineering and installation department has designed and installed this beautiful misting system at this private residence located in Big Horn Country Club. Our installation department installed our (welded) stainless steel misting line across the outer face of their north & south facing patios with nozzles spaced every 12", two industrial pump modules so each patio misting system can run independently and to keep the noise level to a minimum, two ultra light cement pump pads, independent power switches to both patios, we also installed all water and electrical lines to both pump modules and painted all the stainless steel atomization line, clamps and screws for a more clean and hidden look. The entire installation process from start to finish only took six hours to complete with two technicians.
 
     Before  installation our bidding department conducted a proper inspection of the area our client desired to have a misting system installed and then we carefully drafted all options in order to insure they were aware of all available options as well as a course of action to safeguard that the job is completed in a timely, efficient and effective manner.
 
     Our staff maintains a constant stream of knowledge regarding equipment available in the market and what we a capable of producing. Therefore, we maintain trustworthy and transparent estimates to insure each client is receiving the product that they envision for themselves and they do not feel they have made a catalog purchase.
 
     At Custom Mist scheduling is key to keeping our team and clients pleased. We want to make the installation process simple and completed in a timely fashion. For more information, schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.

We are conveniently located in Indio, Ca. and we proudly serve all of Southern California.

We offer Local discounts to all Coachella valley city's including Palm Springs, Cathedral City, Rancho Mirage, Palm Desert, Indian Wells, Bermuda Dunes, Thousand Palms, Desert Hot Springs, La Quinta, Coachella, Indio and Thermal.

Office: 1-(760)-328-5545
Toll Free: 1-(844)-486-6478
82-680 Showcase Pkwy, Suite #2
Indio, CA 92203
License - Bonded - Insured
CA. License #994050

 
    

Posted by at No comments:
Subscribe to: Posts (Atom)