Sunday, March 27, 2016

New misting system installation's in the Coachella Valley, CA by: www.CustomMistSystems.com




New misting system installation's in the Coachella Valley, CA by:
 
 
     During the last few weeks our installation and design department at Custom Mist has been very busy designing and installing misting & fogging system through out the Coachella Valley due to the recent rise in the temperature.
 
     At Custom Mist Inc. we are commitment to product integrity and system performance and are backed by a worldwide distribution network and a team of knowledgeable service, installation and technical personnel. On-site evaluation and technical support are available before, during and after installation. With thousands of installations performed we guarantee our systems can achieve results in even the most challenging environments.

     With over a decade of research, development and installation experience our engineers have culminated the current design and installation of the Custom Mist System the pinnacle of the misting and fogging industry spanning a wide range of applications. Additionally, our misting and fogging systems have helped establish misting systems as the most efficient method of climate control for numerous applications such as outdoor cooling, special effects fogging, dust control, odor control and humidification.

      The heart of the Custom Mist system is the specially designed atomizing nozzle, which atomizes pressurized water. The premise behind this technology is relatively simple: as water evaporates, the surrounding air is cooled. The Custom Mist System is engineered to maximize these effects in a controlled manner, while maintaining cost-effectiveness. Our systems are also commonly used to evenly apply chemical concentrates for purposes such as disinfecting, fertilizing, odor abatement and pest control.
 

          Why should I care, you ask? Countless Custom Mist Inc. customers rely on our products and technology to significantly improve their bottom line.
 
Below are some pictures of our recent installations and some of the products we manufacture.

 For more information, schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.

We are conveniently located in Indio, Ca. and we proudly serve all of Southern California.  

Office: 1-(760)-328-5545
Toll Free: 1-(844)-486-MIST (6478)
82-680 Showcase Pkwy, Suite #2
Indio, CA 92203
License - Bonded - Insured
CA. License #994050

#custommistsystems #coachellavalleymistsystems #mistsystems #mistingsystems #misting #custommistinc #patiomisting #misters #mistingsystem #coachellavalley #palmsprings #palmdesert #laquinta #indianwells #indio #pga #ranchomirage



Posted by at No comments:

Thursday, March 10, 2016

Misting Pumps manufactured, installed and built by www.CustomMistSystems.com

 
 


Misting Pumps manufactured, installed and built by:
 www.CustomMistSystems.com
 
 
     All of our Custom Mist pump modules are designed and assembled in our facility and are all equipped with a dual 5 micron filtration system to ensure clean water to the nozzles, rubber mounted sub-frame, rubber motor mounts, constant duty totally enclosed fan cooled (T.E.F.C.) Marathon single phase electric motor, electrical water valve, Cat ceramic plunger pump, low pressure switch, drain valve, adjustable pressure regulator, 2000 psi liquid filled gauge and a thermo over-load reset button to ensure durability.
Each pump module is custom engineered for specific applications, such as motor rpm, voltage, horsepower, staged, zoned and for wireless remote systems. Our mist systems are designed to take 35 psi. and turn it into 1000 psi. for ultimate cooling.
 
      Custom Mist proudly does all pump manufacturing in house with a team that is constantly improving and developing innovative misting systems to maximize efficiently for every installation, all while striving to continually manufacture the highest quality "Made In America" products. This is why we maintain open lines of communications with our clients to insure the product you receive meets your unique requirements and you do not feel you have made a catalog purchase. With over a decade of experience in the industry, we have developed a distinctive method to combine high pressure hydraulics, electronic control systems and aesthetically pleasing functional designs. Please see the pictures below of three different configurations of our pump modules. Other configurations available to meet all requirements.
 
Pump Specifications:
 
  • Powder coated sub frame & enclosure.
  • Dual 5 micron filtration system. (Two 10" filters)
  • TEFC industrial single phase electric motor with motor overload protection.
  • Cat industrial ceramic plunger pump. (1000 psi.)
  • Drain valve.
  • Voltage options: 120 volt single phase - 575 volt three phase
  • Low pressure switch. (Pump Saver)
  • Electric inlet water solenoid valve.
  • Adjustable pressure regulator.
  • ON / OFF switch.
  • High pressure outlet glycerin filled pressure gauge.
  • Low pressure inlet glycerin filled pressure gauge. (On industrial pump models)
  • External by-pass hose w/ check valve. (On industrial pump models)
  • Internal by-pass  (On direct drive pump module on Skid)
  • Low voltage 24v. switching.  (Optional)
  • 40 VA transformer  (Optional)
  • Electrical contactor.  (Optional)
  • 9' power cord or 1/2" flex electrical conduit for power source.
  • Rubber mounted sub frame & motor mounts to ensure quiet operation.
  • Pump dimensions: Length 26" Width 13" Height 13.2"  (Industrial HD-1000 Model)
  • Pump dimensions: Length 22" Width 11" Height 13.2"  (Residential Model on Skid)
  • Pump dimensions: Length 35" Width 26.5" Height 14"  (Industrial BD Model on Skid)

 For more information or for any design assistance please contact our customer service department.

 
Office: 1-760-328-5545
Toll free: 1-844-486-6478
Email: info@CustomMistSystems.com
Web: www.CustomMistSystems.com
82-680 Showcase Pkwy. Suite #2
Indio, CA 92203
License - Bonded - Insured
License #994050
 
#CustomMistSystems
#Misters #Misting #MistSystem #MistingSystem #PumpModule #MistPump #CustomMist #Custommistinc



Residential pump model on skid.


Industrial HD pump model with pump housing.

Industrial HD pump model specifications.
2Hp, 3gpm shown in picture.
 

Industrial BD pump model on skid.


 


Posted by at No comments:

Wednesday, March 2, 2016

New horse cooling misting system installation by: www.CustomMistSystems.com




 

 
New Horse cooling misting system installation by:
 
 
     One March 2nd. 2016 our installation department installed over 200' of stainless steel atomization misting line over four horse stalls and over the middle of the walkway to cool off all the horses and anyone inside the structure. When the misting system turns on, only the two rows of mist over the horse stalls turn on, then for when the weather gets warmer we installed a section control valve for the misting line above the middle walkway that can be turned on and off anytime the customer pleases. We also plumbed a new water line and ran new electrical from the breaker panel to the pump module and installed our industrial HD-1000 pump module with a 2HP motor, 1.5gpm pump, a power switch on the front of the pump module and a pulsation dampener to keep the vibration noise   to a minimum so the horses don't get spooked.     
 
 "Please see the pictures below"
 
     If the weather is either too hot or humid it is extremely hard for horses to shed their body heat. Most animals are kept in barns or shade structures that can be substantially hotter then outside temperatures due to the radiant heating of the steel structure. Our custom designed misting systems can protect horses from excessive heat and keep them cool and refreshed. All of our custom designed misting systems are energy efficient, use water only when needed and provide you with an economical solution.


 
 
       Benefits:
  • Can lower the temperature up to 35 degrees.
  • Can help lower the threat of morality.
  • Can help eliminate flying incest's.
  • Can help reduce irritation and discomfort to your horses.
  • Can help keep dust and pollen at bay.
 
For any questions or to schedule a free in-house estimate, consultation or for any design assistance please contact our customer service department.
Posted by at No comments:
Subscribe to: Posts (Atom)